Corolla Sedan L4-96.8 1587cc 1.6L DOHC (4A-FE) (1989)
/Page-731011.png)
6. INSTALL AND FINGER TIGHTEN BOLTS IN UPPER VALVE BODY
Install and finger tighten the three bolts.
NOTE: Each bolt length (mm) is indicated in the figure.
7. INSTALL UPPER VALVE BODY COVER
a. Make sure that the keys are installed correctly.
b. Install the sleeve stopper.
c. Position a new gasket and plate and then another new gasket.
d. Install the strainer onto the plate.