Corolla Sedan L4-96.8 1587cc 1.6L DOHC (4A-FE) (1989)
/Page-731021.png)
a. Make sure that the keys and strainer on the upper side of the lower valve body are installed correctly.
b. Make sure that the keys, pins, check balls and vibrating stopper on the lower side of the upper valve body are installed correctly.
2. POSITION PLATE AND NEW GASKETS ON LOWER VALVE BODY
Position the new No.2 gasket, the plate and then the new No. 1 gasket on the lower valve body.
NOTE: Since the No.1 gasket and No.2 gasket are similar use the illustration below to discriminate between them.