toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

All Technical Service Bulletins for Center Support: > < Axle Nut|Specifications
Page 1
background image

Center Support: Customer Interest
Drivetrain - Center Support Bearing High Pitched Noise

DRIVELINE &
REFERENCE

DIFFERENTIAL

NUMBER

002

DATE

07-28-89

MODEL

AE9#, SV2#J
ALL-TRAC

TITLE     

ALL-TRAC DRIVESHAFT CENTER SUPPORT BEARING

A high pitched noise may be heard from the Driveshaft center support bearing on All-Trac Camry and Corolla models at temperatures below 14~F
(-10~C).

In the production of the All-Trac Camry and Corolla, either the NSK or KOYO, bearings are used for the Center Support. The KOYO bearings have
been identified as the cause of the above condition.

The KOYO Bearing can be identified as shown below:
1)

The KOYO bearing identification is embossed on the rubber cushion of the bearing assembly.

2)

The NSK bearing assembly has no identification on the rubber cushion.

3)

The NSK bearings will be used on vehicles produced after February 1989 (see vehicle information section of this bulletin). The KOYO bearing
will be continued only after it has been modified to eliminate the above condition.

PRODUCTION EFFECTIVE:

VIN

PRODUCTION DATE

JT2SV2#J#K0021768

FEBRUARY 1989

JT2AE9#*#K0067455

FEBRUARY 1989

PART NUMBER INFORMATION:

PREV. PART NO.

NEW PART NO.

PART NAME

APPLICATION

37230-32011*

---SAME---

BEARING ASSY.

CAMRY

FRONT/REAR

37230-12081*

---SAME---

BEARING ASSY. FRONT

COROLLA

37230-12091*

---SAME---

BEARING ASSY. REAR

COROLLA

*

All supply parts are NSK Bearings and are interchangeable with KOYO Bearings.

All Technical Service Bulletins for Center Support: > < Axle Nut|Specifications