Corolla Sedan L4-96.8 1587cc 1.6L DOHC (4A-FE) (1989)
Axle Shaft: Service and Repair
Axle Shaft Assembly, Constant Velocity Type
Precautionary Note
The axle hub bearing could be damaged if it is subjected to vehicle weight, as when moving the vehicle with the driveshaft removed. If it is
absolutely necessary to move the vehicle with the driveshaft removed, support axle hub bearing using tool 09608-16041 or equivalent.
Removal
Fig. 11 Exploded View Of AWD Front Driveshaft Components.
1.
Remove cotter pin, locknut cap and locknut.
2.
Remove engine undercovers.
3.
Disconnect tie rod ends.
4.
Disconnect steering knuckle from lower arm.
5.
Using a plastic hammer, tap driveshaft from front hub.
6.
Using hammer handle carefully pry driveshaft from transfer case.
7.
Remove front driveshaft, Fig. 11.