Corolla Sport RWD L4-1587cc 1.6L DOHC (4A-GE) (1986)
(c) Connect the water inlet and water by-pass hoses to the inlet pipe.
5. TEMPORARILY INSTALL WATER PUMP PULLEY
Install the water pump pulley and partially tighten the four bolts.
6. (4A-F 4A-FE) INSTALL PS DRIVE BELT
7. INSTALL ALTERNATOR DRIVE BELT
(a) Place the drive belt on the each pulley and set up the drive belt.
(b) Tighten the four bolts of the water pump pulley.
8. (4A-GE) INSTALL PS AND/OR A/C DRIVE BELT
9. ADJUST DRIVE BELT TENSION
Belt tension gauge
Nippondenso BTG-20 (95506-000200)
Borroughs No. BT-33-73F
Drive belt tension:
4A-F, 4A-FE
Alternator
New belt: 160 ± 20 lb
Used belt: 130 ± 20 lb
PS
New belt: 125 ± 25 lb
Used belt: 80 ± 20 lb
A/C
New belt: 160 ± 20 lb
Used belt: 100 ± 20 lb
4A-GE
Alternator
New belt: 175 ± 5 lb
Used belt:P 115 ± 20 lb
PS and/or A/C
New belt: 175 ± 5 lb
Used belt: 115 ± 20 lb
10. REFILL WITH COOLANT
11. START ENGINE AND CHECK FOR LEAKS