toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Wheel Bearing > < Suspension Strut / Shock Absorber|Testing and Inspection|Page 1600
Page 1
background image

Trailing Arm: Service and Repair

Fig. 8 Coil spring rear suspension. Corolla rear wheel drive, Cressida, Tercel Wagon w/4 wheel drive & Van w/rear wheel drive

1.

Raise and support rear of vehicle, then remove rear wheels.

2.

Remove cotter pin, nut, washer and outer bushing as necessary from lateral control arm rear axle housing mounting.

3.

Remove nut and washer from lateral control arm frame mounting, then remove bolt and lateral control arm from vehicle, Fig. 8.

4.

Use tool 09710-14010 or equivalent to replace bushings, if necessary.

5.

Reverse procedure to install.

Wheel Bearing > < Suspension Strut / Shock Absorber|Testing and Inspection|Page 1600