Corolla Wagon L4-1587cc 1.6L DOHC (4A-F) (1987)
15. REMOVE THREE OIL SEAL RINGS FROM CENTER SUPPORT
16. REMOVE ONE-WAY CLUTCH ASSEMBLY AND OIL SEAL RINGS FROM SUN GEAR
INSPECTION OF CENTER SUPPORT ASSEMBLY
1. CHECK OPERATION OF ONE-WAY CLUTCH
Hold the No.2 brake hub and turn the sun gear. The sun gear should turn freely counterclockwise and should lock clockwise.
If the one-way clutch does not work properly, replace it.
2. IF NECESSARY, REPLACE ONE-WAY CLUTCH
a. Bend several tabs back with a tapered punch.
b. Pry off the retainer with a screwdriver. Leave the other retainer on the hub.
c. Remove the one-way clutch.