Corolla Wagon L4-96.8 1587cc 1.6L DOHC (4A-FE) (1996)
/Page-240004.png)
Seal packing:
Part No. 0S826-00080 or equivalent
-
Install the ignition coil with the 4 screws.
-
Connect the 3 wires to the ignition coil terminals with the 2 nuts as shown in the illustration.
NOTICE:
-
When connecting the wires to the ignition coil, Insert both properly into their grooves found on the side of the ignition coil.
-
Be sure the wires do not contact with signal rotor or distributor housing.
4. INSTALL IGNITION COIL DUST COVER
-
Install a new gasket to the distributor housing.
-
Install the dust cover.
5. INSTALL ROTOR
6. INSTALL DISTRIBUTOR CAP
-
Install the distributor cap with the 3 bolts.
DISTRIBUTOR INSTALLATION