Corolla Wagon L4-96.8 1587cc 1.6L DOHC (4A-FE) (1996)
Engine RPM Sensor (NE signal): Service and Repair
CRANKSHAFT POSITION SENSOR REMOVAL
1. DISCONNECT CRANKSHAFT POSITION SENSOR CONNECTOR
2. REMOVE CRANKSHAFT POSITION SENSOR
-
Remove the bolt and crankshaft position sensor.
Torque: 9.3 N.m (95 kgf.cm, 82 in.lbf)
CRANKSHAFT POSITION SENSOR INSTALLATION
INSTALLATION HINT: Installation is in the reverse order of removal.