Corolla Wagon 4WD L4-96.8 1587cc 1.6L DOHC (4A-FE) (1990)
/Page-799004.png)
b. Using snap ring pliers, install the snap ring.
3. INSTALL OIL SEAL
(Left side oil seal)
a. Coat a new oil seal lip with MP grease.
b. Using a hammer and SST, drive in a oil seal.
SST 09316-60010 (09316-00010, 09316-00040)
Oil seal depth: 0 mm (0 in.)
(Right side oil seal)
a. Coat a new oil seal lip with MP grease.
b. Using a hammer and SST, drive in a oil seal.
SST 09608-32010, 09608-35014 (09608-06020)
Oil seal depth: 0 mm (0 in.)