Cressida L6-2759cc 2.8L DOHC (5M-GE) (1988)
/Page-823002.png)
Fig. 10 Terminal installation with guide plate over ``W''
5.
If adjusting terminal is over ``R'' area,
Fig. 9, connect adjusting terminal to ``VR'' and ``WB'' terminal. If scale is positioned over ``W'' area, Fig.
10, connect adjusting terminal to ``VR'' and ``YW'' terminal.
6.
Remove jumper.
7.
Reconnect short circuit connector, then install glove box and undercovers.
