Cressida L6-2759cc 2.8L DOHC (5M-GE) (1988)
Distributor: Testing and Inspection
CHECK SIGNAL GENERATOR (PICKUP COIL)
Using an ohmmeter, check each resistance of the two signal generators (pickup coils).
G pickup coil resistance:
G -> G-
140 - 180 Ohms
Ne pickup coil resistance:
Ne -> G-
140 - 180 Ohms
If the resistance is not correct, replace the distributor.
INSPECT AIR GAP
Using a thickness gauge, measure the gap between the signal rotor and the signal generators (pickup coils) projection.
Air gap: 0.2 - 0.4 mm (0.008 - 0.016 in.)
If not, replace the distributor.