Cressida L6-3.0L DOHC (7M-GE) (1989)
17. REMOVE CLUSTER FINISH CENTER PANEL WITH RADIO
(a) Remove four bolts and pull out the cluster finish center panel with radio.
(b) Disconnect the connectors and antenna cable.
18. REMOVE RADIO FROM CLUSTER FINISH CENTER PANEL
Remove six screws and the radio from the cluster finish center panel.
19. REMOVE REAR CONSOLE BOX
(a) Using a screwdriver, pry up the console box hole cover.
HINT: Tape the screwdriver tip before use.
(b) Remove eight screws and the rear console box.
20. REMOVE FINISH LOWER CENTER PANEL
(a) Remove two screws and the finish lower center panel.
(b) Disconnect the connector.