Cressida Sedan L6-2759cc 2.8L DOHC (5M-GE) (1986)
![background image](/toyota/cressida_sedan/l6-2759cc_2.8l_dohc_(5m-ge)/Page-481002.png)
-
Examine for particles in the fluid.
-
Remove oil pan.
-
Check for particles in the oil pan. Clean pan and magnet if necessary.
-
Remove entire valve body (refer to correct R/M for procedure).
Remove the small lower valve body cover plate, to gain access to the lock-up relay valve and sleeve assembly retaining pin. Inspect for any foreign
material and clean this area as necessary.
Small Lower Valve Body Plate Removed
REPAIR PROCEDURES:
-
Remove the lock-up relay valve and sleeve.