FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
HINT: Use the same procedure to install all the assist grip plugs.
(a) Engage the 2 claws and install the assist grip plug.
35. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
(a) Install the front door opening trim weatherstrip.
36. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
HINT: Use the same procedure as for the RH side.
37. INSTALL COWL SIDE TRIM BOARD RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
38. INSTALL COWL SIDE TRIM BOARD LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
39. INSTALL FOOTREST CLIP See: Body and Frame/Interior Moulding / Trim/Foot Rest/Service and Repair/Installation
40. INSTALL FRONT FLOOR FOOTREST See: Body and Frame/Interior Moulding / Trim/Foot Rest/Service and Repair/Installation
41. INSTALL FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
42. INSTALL FRONT DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
43. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
44. INSPECT SRS WARNING LIGHT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System