FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
(b) Disconnect the speaker connector.
(c) Loosen the screw.
(d) Remove the roof speaker by turning it in the direction of the arrow shown in the illustration.
Installation
AUDIO / VISUAL: ROOF SPEAKER: INSTALLATION
INSTALLATION
HINT: The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
1. INSTALL ROOF SPEAKER ASSEMBLY
(a) Install the roof speaker by turning it in the direction of the arrow shown in the illustration.
(b) Tighten the screw.
(c) Connect the speaker connector.
(d) Cover the engaged portion of the connector and the lead line with a new hole cover, and attach them to the roof headlining securely.
NOTE: Securely attach the hole cover to the roof headlining to avoid looseness in the connector and the lead line.