FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
(1) Remove the deck trim side panel assembly See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal.
(b) for LH Side:
(1) Remove the deck trim side panel assembly See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal.
22. REMOVE ROOF SIDE INNER GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
23. REMOVE SPEAKER MOUNTING BRACKET
(a) Disconnect the speaker connector.
(b) Remove the 2 bolts and the speaker mounting bracket.
24. REMOVE REAR SPEAKER ASSEMBLY
(a) Remove the clamp, the 2 bolts and the rear speaker.
Installation
AUDIO / VISUAL: LUGGAGE SPEAKER: INSTALLATION
INSTALLATION
HINT: The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
1. INSTALL REAR SPEAKER ASSEMBLY
(a) Inert the 2 hooks into the 2 cutouts of the speaker mounting bracket and install the rear speaker with the 2 bolts.
Torque: 8.1 Nm (85 kgf-cm, 72 in-lbf)
(b) Install the clamp.
2. INSTALL SPEAKER MOUNTING BRACKET
(a) Install the speaker mounting bracket with the 2 bolts.
Torque: 8.1 Nm (85 kgf-cm, 72 in-lbf)
(b) Connect the speaker connector.
3. INSTALL ROOF SIDE INNER GARNISH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY
(a) for RH Side:
(1) Install the deck trim side panel assembly See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation.
(b) for LH Side:
(1) Install the deck trim side panel assembly See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation.
5. INSTALL REAR DECK TRIM COVER (w/ Power Outlet Socket) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
6. INSTALL REAR SEAT OUTER BELT ASSEMBLY See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Rear Seat Outer
Belt Assembly/Installation