FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
Headliner: Service and Repair
Reassembly
INTERIOR: ROOF HEADLINING: REASSEMBLY
REASSEMBLY
1. INSTALL ROOF WIRE
(a) Apply new double-sided tape to the roof headlining along the markings of the roof headlining.
NOTICE:
-
Apply the tape securely in place.
-
Do not touch the adhesive surface when applying the tape to prevent adhesion failure.
(b) Install the roof wire as shown in the illustration.
NOTICE:
-
Do not twist the flat wire harness when installing it.
-
Securely fix the wire harness by pressing it.
-
Securely fix the wire harness to secure a gap between the wire harness and the roof panel in part A.
-
Securely fix the wire harness to avoid looseness in the wire harness between portion B and the marking tape.
2. INSTALL ROOF SILENCER PAD
(a) Apply double-sided tape to the roof silencer pad.
(b) Align the 2 roof silencer pads with the markings of the roof headlining and install them onto the roof headlining.
3. INSTALL ROOF SPEAKER ASSEMBLY