FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
/Page-1827001.png)
Power Mirror Switch: Testing and Inspection
MIRROR: OUTER MIRROR SWITCH:
INSPECTION
1. INSPECT OUTER MIRROR SWITCH
(a) Check the resistance.
(1) Select L on the left/right adjustment switch.
(2) Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the outer mirror switch.
(3) Select R on the left/right adjustment switch.
(4) Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
Standard Resistance: