FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
(d) Remove the brake booster with accumulator pump assembly.
(e) Remove the 2 bushes and 2 collars from the brake booster with accumulator pump assembly.
(f) Using a 4 mm hexagon wrench, remove the 2 pins.
6. REMOVE BRAKE ACTUATOR BRACKET
(a) Using a 5 mm hexagon wrench, remove the bolt and brake actuator bracket.
7. REMOVE BRAKE BOOSTER PUMP BRACKET
(a) Using a 5 mm hexagon wrench, remove the 2 bolts and the brake booster pump bracket.
(b) Remove the bush from the brake booster pump bracket.
8. REMOVE MASTER CYLINDER SOLENOID
(a) Remove the 6 bolts and the master cylinder solenoid.
(b) Remove the gasket.
9. REMOVE MASTER CYLINDER PUSH ROD CLEVIS