FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
2. INSTALL CLEAN AIR FILTER SUB-ASSEMBLY
(a) Engage the 2 claws and install the air filter.
NOTE: Install the air filter with its UP mark oriented in the correct direction.
3. INSTALL BLOWER RESISTOR
(a) Install the blower resistor with the 2 screws.
4. INSTALL BLOWER MOTOR
(a) Install the blower motor with the 3 screws.
5. INSTALL AIR INLET CONTROL SERVO MOTOR
(a) Install the air inlet control servo motor with the 2 screws.
Installation
AIR CONDITIONING: BLOWER UNIT: INSTALLATION
INSTALLATION
1. INSTALL BLOWER UNIT ASSEMBLY
(a) Install the 2 screws and blower unit as shown in the illustration.