FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
(1) Connect the positive (+) lead from the battery to terminal 1 (IG+) and the negative (-) lead to terminals 8 (BLW) and 20 (GND).
(2) Push the A/C button in and then check that the indicator lights up.
Standard:
HINT: Inspect the A/C indicator operation in any position except MAX COOL. The A/C indicator ON/OFF operation does not function in
MAX COOL position (The A/C indicator is held in ON state).
If the result is not as specified, replace the integration control and panel assembly.
(3) Under the above condition, connect the positive (+) lead from the battery to terminal 2 (ILL+) and then check that the indicator dims.
Standard:
HINT: Inspect the A/C indicator operation in any position except MAX COOL. The A/C indicator ON/OFF operation does not function in
MAX COOL position (The A/C indicator is held in ON state).
If the result is not as specified, replace the integration control and panel assembly.
(d) Inspect the REC indicator operation.
(1) Connect the positive (+) lead from the battery to terminal 1 (IG+) and the negative (-) lead to terminal 20 (GND).
NOTE: Inspect the MODE switch in any position except DEF.
(2) Push the REC button in and check that the indicator lights up.
Standard: