FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
(a) Disengage the 6 claws and 3 clamps and remove the rear air duct.
74. REMOVE NO. 1 AIR DUCT
(a) Disengage the 3 claws and remove the air duct.
75. REMOVE NO. 2 AIR DUCT
(a) Disengage the 3 claws and remove the air duct.
76. REMOVE NO. 1 INSTRUMENT PANEL BRACE MOUNTING BRACKET
(a) for LH side:
(1) Remove the bolt and nut and remove the instrument panel brace mounting bracket.
(b) for RH side:
(1) Remove the bolt and nut and remove the instrument panel brace mounting bracket.
77. REMOVE ECM See: Powertrain Management/Computers and Control Systems/Engine Control Module/Service and Repair/Removal and
Replacement
78. REMOVE STEERING COLUMN HOLE COVER See: Steering and Suspension/Steering/Steering Column/Service and Repair/Removal