FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
(f) Install the plate with the 2 screws.
3. INSTALL COOLER EXPANSION VALVE
(a) Apply sufficient compressor oil (ND-OIL8) to the fitting surface of the cooler expansion valve.
Compressor oil:
ND-OIL8 or the equivalent
(b) Install the cooler expansion valve onto the cooler evaporator.
4. INSTALL AIR CONDITIONING TUBE ASSEMBLY
(a) Apply sufficient compressor oil (ND-OIL8) to 2 new O-rings and the fitting surface of the air conditioning tube.
Compressor oil:
ND-OIL8 or the equivalent
(b) Install the 2 O-rings onto the air conditioning tube.
(c) Using a hexagon wrench 4, install the air conditioning tube with the 2 hexagon bolts.
Torque: 3.5 Nm (36 kgf-cm, 31 in-lbf)
5. INSTALL COVER PLATE
(a) Engage the claw.
(b) Install the cover plate with the screw.
6. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
(a) Install the heater radiator unit onto the heater case.
(b) Install the clamp with the screw.
7. INSTALL COOLER UNIT DRAIN HOSE