FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
If step 3 is NOT performed within 6 seconds while in Compass Correction mode, the calibration is canceled, and the display returns to the
outside temperature indication.
3.
Refer to the following map to determine the vehicle's location and select the relevant zone number by pushing the "E/M" button.
NOTE:
^
After calibration, do NOT press any buttons for 6 seconds OR push and hold the "SET" button for about 2 seconds.
^
The display returns to the outside temperature display.
Circling Calibration Procedure
1.
Start the engine.