FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
REMOVAL
HINT:
-
Use the same procedure for both the RH and LH sides.
-
The procedure described below is for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR COURTESY SWITCH
(a) Remove the bolt and front door courtesy switch.
(b) Disconnect the connector.
Installation
LIGHTING: FRONT DOOR COURTESY SWITCH: INSTALLATION
INSTALLATION
1. INSTALL FRONT DOOR COURTESY SWITCH
(a) Connect the connector.
(b) Install the front door courtesy switch with the bolt.
Torque: 7.0 Nm (71 kgf-cm, 62 in-lbf)
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)