FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
/Page-2005001.png)
Brake Lamp: Service and Repair
Reassembly
LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: REASSEMBLY
REASSEMBLY
1. INSTALL REAR TURN SIGNAL LIGHT BULB
(a) Install the rear combination light bulb into the light socket.
(b) Turn the rear combination light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
2. INSTALL BACK UP LIGHT BULB
(a) Install the rear combination light bulb into the light socket.
(b) Turn the rear combination light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
3. INSTALL TAIL AND STOP LIGHT BULB
(a) Install the rear combination light bulb into the light socket.
(b) Turn the rear combination light socket and bulb, in the direction indicated by the arrow in the illustration, to install them.
4. INSTALL REAR COMBINATION LIGHT GASKET
(a) Install a new rear combination light gasket.