FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
(a) Install the No. 2 surge tank stay with the 2 bolts.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)
7. INSTALL NO. 1 SURGE TANK STAY
(a) Install the No. 1 surge tank stay with the 2 bolts.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)
8. INSTALL OIL BAFFLE PLATE
(a) Install the oil baffle plate with the bolt.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
9. INSTALL THROTTLE BODY BRACKET
(a) Install the throttle body bracket with the 2 bolts.
Torque: 21 Nm (214 kgf-cm, 15 ft-lbf)
10. INSTALL AIR CLEANER ASSEMBLY See: Throttle Body/Service and Repair/Installation
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)
12. ADD ENGINE COOLANT See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
13. CHECK FOR ENGINE COOLANT LEAK See: Engine, Cooling and Exhaust/Cooling System/Coolant/Service and Repair
14. CHECK FOR FUEL LEAK
15. INSTALL V-BANK COVER See: Throttle Body/Service and Repair/Installation