FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
Crankshaft Position Sensor: Testing and Inspection
1GR-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR:
INSPECTION
1. INSPECT CRANKSHAFT POSITION SENSOR
(a) Check the resistance.
(1) Using an ohmmeter, measure the resistance between the terminals.
Standard resistance:
1,850 to 2,450 Ohms at 20°C (68°F)
If the result is not as specified, replace the crankshaft position sensor.