FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
/Page-713002.png)
HINT: The structure of the fuel tube connector is as shown in the illustration.
(1) Check the fuel tube connector and pipe for dirt and mud before removing the fuel tube connector.
If dirty, wipe it with a shop rag or piece of cloth.
(2) Pinch the retainer as illustrated, and pull the fuel tube connector out of the pipe.
(3) If the fuel tube connector and pipe are stuck, pinch the pipe, then push and pull the fuel tube connector to release and disconnect it.
NOTE: Never use any tools.
(4) After removing the fuel tube, check the sealing surface of the pipe for dirt and mud.
If dirty, wipe it with a shop rag or piece of cloth.
(5) Cover the disconnected fuel tube connector and pipe with a vinyl bag to prevent damage and the intrusion of foreign objects.
(d) Take the following precautions when installing the fuel tube connector.
(1) Align the fuel tube connector with the pipe, then push in the fuel tube connector until the retainer makes a "click" sound.
(2) After connecting the fuel tube connector, check that the fuel tube connector and pipe are securely connected by pulling them.