FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
/Page-1644013.png)
SST: 09082-00700
CAUTION: Always use the specified SST when activating the seat belt pretensioner.
(1) Connect the SST red clip to the positive battery terminal and the black clip to the negative battery terminal.
HINT: Do not connect the yellow connector. The yellow connector is for connections to the seat belt pretensioner.
(2) Press the SST activation switch and check that the LED of the SST activation switch illuminates.
CAUTION: If the LED illuminates when the activation switch is not being pressed, SST may be malfunctioning. Do not use SST.
(e) Connect SST.
(1) Connect SST, then connect the yellow connector to the seat belt pretensioner.
SST: 09082-00770
NOTE: Do not lock the secondary lock of the twin lock to avoid damaging the SST connector and wire harness.
(2) Using a service-purpose wire harness for the vehicle, tie the seat belt pretensioner to the tire with a wheel attached.
Stripped wire harness section: