FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
(a) Install the unlock warning switch onto the steering column bracket upper.
(b) Connect the connector.
2. INSTALL KEY INTER LOCK SOLENOID (for Automatic Transmission)
(a) Install the key inter lock solenoid with the 2 screws.
(b) Install the clamp onto the steering column bracket upper.
3. INSTALL IGNITION SWITCH LOCK CYLINDER AND KEY SET
(a) Make sure that the ignition switch lock cylinder is in the ACC position.
(b) Install the ignition switch lock cylinder.
4. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
5. CONNECT PASSENGER AIRBAG CONNECTOR See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
6. REMOVE INSTRUMENT PANEL FINISH PANEL END LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Installation
7. INSTALL ASSIST GRIP RETAINER RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
8. INSTALL ASSIST GRIP RETAINER LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
9. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service
and Repair/Instrument Panel Speaker/Installation
10. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation
11. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Installation
12. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Installation
13. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Dashboard