FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
Acceleration/Deceleration Sensor: Testing and Inspection
BRAKE CONTROL: YAW RATE AND DECELERATION SENSOR:
INSPECTION
1. INSPECT YAW RATE AND DECELERATION SENSOR
(a) Check the yaw rate and deceleration sensor.
If any of the following occurs, replace the yaw rate and deceleration sensor with a new one.
-
The surface of the yaw rate and deceleration sensor is cracked, dented or chipped.
-
The connector is scratched, cracked, or damaged.
-
The yaw rate and deceleration sensor has been dropped.