FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
Hazard Warning Switch: Service and Repair
Removal
LIGHTING: HAZARD WARNING SWITCH: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE INSTRUMENT PANEL GARNISH LH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
3. REMOVE INSTRUMENT PANEL GARNISH RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
4. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
(a) Remove the 2 screws.
(b) Disengage the 4 clips and remove the integration control and panel.