FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
Auxiliary Power Outlet Switch: Service and Repair
Removal
OTHER SYSTEM: INVERTER MAIN SWITCH: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal
4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD) See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
5. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
6. REMOVE BOX BOTTOM MAT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal
7. REMOVE CONSOLE BOX ASSEMBLY REAR See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
8. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
9. REMOVE INVERTER MAIN SWITCH
(a) Disengage the 2 clips and remove the inverter main switch.
10. REMOVE INVERTER MAIN SWITCH BULB
(a) Turn the inverter main switch bulb, in the direction indicated by the arrow in the illustration, to remove it.