FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
/Page-1332002.png)
11. INSTALL DECK SIDE GARNISH (w/ Amplifier Box Speaker Assembly) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
12. INSTALL REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
13. INSTALL FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
14. INSTALL REAR FLOOR MAT ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
15. INSTALL REAR FLOOR MAT SUPPORT PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
16. INSTALL REAR FLOOR BOARD See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
17. INSTALL REAR SEATBACK ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Installation
18. INSTALL REAR SEAT BACK BOARD CARPET ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH
Side)/Installation
19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)