FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
/Page-1344001.png)
Auxiliary Power Outlet Switch: Testing and Inspection
OTHER SYSTEM: INVERTER MAIN SWITCH:
INSPECTION
1. INSPECT INVERTER MAIN SWITCH
(a) Check the resistance.
(1) Measure the resistance and check the results in accordance with the value(s) in the tables below.
Standard resistance (Switch operation):
If the result is not as specified, replace the inverter main switch.
Standard resistance (Indicator light circuit):
If the result is not as specified, replace the bulb.
Standard resistance (Illumination circuit):
If the result is not as specified, replace the bulb.