FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
9. CONNECTION OF CONNECTORS FOR FRONT SEAT SIDE AIRBAG ASSEMBLY
(a) Connect the connector as shown in the illustration. (When locking, make sure that the slider returns to its original position and a click sound
can be heard.)
HINT: When connecting, the slider slides. Do not touch the slider while connecting, as this may result in an insecure fit.
10. DISCONNECTION OF CONNECTORS FOR CENTER AIRBAG SENSOR ASSEMBLY
(a) Pull the lever by pushing part A as shown in the illustration and disconnect the holder (with connectors).
HINT: Perform the following procedures when replacing the holder.
(b) Remove the holder.
(1) Using a screwdriver, unlock the retainer.