FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
(c) Provisionally tighten the bolt, nut and washer.
2. INSTALL PARKING BRAKE CABLE
(a) Install the parking brake cable onto the lower control arm.
Torque: 13 Nm (127 kgf-cm, 9 ft-lbf)
3. INSTALL REAR WHEEL
Torque: 112 Nm (1,137 kgf-cm, 82 ft-lbf)
4. STABILIZE SUSPENSION
(a) Jack down the vehicle.
(b) Bounce the vehicle up and down several times to stabilize the suspension.
5. FULLY TIGHTEN REAR LOWER CONTROL ARM
(a) Fully tighten the 2 bolts.
Torque: 130 Nm (1,326 kgf-cm, 96 ft-lbf)
HINT: While fixing the nut, turn and install the bolt.