FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
Tire Pressure Module: Service and Repair
Removal
TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: REMOVAL
REMOVAL
1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
2. REMOVE INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal
3. REMOVE TIRE PRESSURE WARNING ECU
(a) Disconnect the tire pressure warning ECU connector.
(b) Remove the nut and tire pressure warning ECU.