FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
Seals and Gaskets: Service and Repair
Removal
DIFFERENTIAL: REAR DIFFERENTIAL CARRIER OIL SEAL: REMOVAL
REMOVAL
1. REMOVE REAR PROPELLER SHAFT ASSEMBLY (for 2WD) See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service
and Repair/Removal
2. REMOVE REAR PROPELLER SHAFT ASSEMBLY (for 4WD) See: Drive/Propeller Shafts, Bearings and Joints/Drive/Propeller Shaft/Service
and Repair/Removal
3. REMOVE REAR DRIVE PINION NUT
(a) Using SST and a hammer, loosen the staked part of the nut.
SST: 09930-00010
(b) Using SST to hold the companion flange in place, remove the nut.
SST: 09330-00021
09330-00030
4. REMOVE REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY
(a) Using SST, remove the companion flange.
SST: 09950-30012
09951-03010
09953-03010
09954-03010
09955-03030
09956-03030
NOTE: Before using SST (center bolt), apply hypoid gear oil to its threads and tip.
5. REMOVE REAR DIFFERENTIAL CARRIER OIL SEAL