FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT ARMREST BASE UPPER PANEL See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly
3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the power window regulator switch.
Installation
WINDSHIELD / WINDOWGLASS: FRONT PASSENGER SIDE POWER WINDOW SWITCH: INSTALLATION
INSTALLATION
1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
(a) Engage the 2 claws and install the power window regulator switch.
2. INSTALL FRONT ARMREST BASE UPPER PANEL See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Reassembly
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 Nm (40 kgf-cm, 35 in-lbf)