FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
/Page-2163001.png)
Power Window Switch: Testing and Inspection
Power Window Master Switch
WINDSHIELD / WINDOWGLASS: POWER WINDOW MASTER SWITCH:
INSPECTION
1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
(a) Check the resistance.
(1) Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the tables below.
Standard Resistance:
Driver switch
If the result is not as specified, replace the power window regulator master switch.
Standard Resistance:
Passenger side switch
If the result is not as specified, replace the power window regulator master switch.
(b) Check the illumination operation.
(1) Apply battery voltage to the power window regulator master switch and check that the illumination comes on.
Standard: