FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
Back Window Glass: Service and Repair
Removal
WINDSHIELD / WINDOWGLASS: BACK DOOR GLASS: REMOVAL
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE SPARE DISC WHEEL
3. REMOVE NO. 1 REAR SPOILER COVER See: Lighting and Horns/Center Mounted Brake Lamp/Service and Repair/Removal
4. REMOVE REAR SPOILER See: Body and Frame/Spoilers, Flaps, and Air Dams/Spoiler/Service and Repair/Removal
5. REMOVE BACK WINDOW SUPPORT LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Shock /
Support/Service and Repair/Back Window Support/Removal
6. REMOVE BACK WINDOW SUPPORT RH
HINT: Use the same procedure as for the LH side.
7. REMOVE BACK DOOR GLASS
(a) Disconnect the 2 defogger connectors.
(b) Remove the 2 nuts and the back door glass.
8. REMOVE BACK WINDOW STAY UPPER BRACKET RH
(a) Remove the 2 screws, the retainer and the back window stay upper bracket.
9. REMOVE BACK WINDOW STAY UPPER BRACKET LH
HINT: Use the same procedure as described for the RH side.
10. REMOVE BACK WINDOW LOCK STRIKER ASSEMBLY
(a) Remove the 2 screws, the retainer and the back window lock striker.