FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
Windshield Washer Motor: Service and Repair
Installation
WIPER AND WASHER: WASHER MOTOR: INSTALLATION
INSTALLATION
1. INSTALL FRONT WASHER MOTOR AND PUMP ASSEMBLY
(a) Install the windshield washer motor and pump onto the packing of the washer jar.
2. INSTALL REAR WASHER MOTOR AND PUMP ASSEMBLY (w/ Rear Wiper)
(a) Install the windshield washer motor and pump onto the packing of the washer jar.
3. CONNECT WASHER WIRING
(a) Connect the connector and the harness clamps.
(b) Connect the washer hose.
4. CONNECT WASHER WIRING (w/ Rear Wiper)
(a) Connect the 2 connectors and the harness clamps.
(b) Connect the 2 washer hoses.
5. INSTALL WINDSHIELD WASHER JAR ASSEMBLY
(a) Install the windshield washer jar with the 2 bolts.
Torque: 3.5 Nm (36 kgf-cm, 31 in-lbf)
(b) Connect the connector.
6. FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID