FJ Cruiser 2WD V6-4.0L (1GR-FE) (2008)
(a) Disengage the 4 claws and remove the front fender side panel upper LH.
10. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
(a) Disengage the 7 clips and remove the cowl top ventilator louver sub-assembly.
11. REMOVE COWL TOP VENTILATOR LOUVER RH
(a) Disengage the clip and remove the hood to cowl top seal.
(b) Remove the 3 clips and the claw, and remove the cowl top ventilator louver RH.
12. REMOVE COWL TOP VENTILATOR LOUVER LH
(a) Remove the 5 clips.
(b) Disengage the 7 claws and remove the cowl top ventilator louver LH.
13. REMOVE FRONT WIPER MOTOR AND LINK
(a) Remove the 5 bolts.
(b) Slide the wiper link. Disengage the meshing of the rubber pin, then disconnect the connector and remove the front wiper motor and link.
14. REMOVE FRONT WIPER MOTOR