FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
3. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP
a. Remove the front door opening trim weatherstrip to the extent that the front pillar garnish can be removed.
4. REMOVE ASSIST GRIP PLUG
HINT: Use the same procedure for both sides.
a. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the assist grip plug.
5. REMOVE ASSIST GRIP ASSEMBLY
a. Remove the 2 screws and the assist grip.
6. REMOVE FRONT PILLAR GARNISH
7. REMOVE RADIATOR GRILLE
8. REMOVE FRONT BUMPER COVER
9. REMOVE SIDE STEP SUB-ASSEMBLY (w/ Side Step)
HINT: Use the same procedure as for the LH side.
10. REMOVE ROCKER PANEL MOULDING
HINT: Use the same procedure as for the LH side.