FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
a. Disconnect the speaker connector.
b. Remove the 4 screws and the front No. 1 speaker.
INSTALLATION
HINT: The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY
a. Install the front No. 1 speaker with the 4 screws.
Torque: 2.5 N.m (25 kgf.cm, 22 in.lbf)
b. Connect the speaker connector.
2. INSTALL FRONT DOOR TRIM BOARD SUBASSEMBLY