FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
![background image](/toyota/fj_cruiser_4wd/v6-4.0l_(1gr-fe)/Page-1409002.png)
2.
Remove the two screws and the inside door handle assembly.
3.
Install the NEW inside door handle assembly in reverse order and reassemble the door panel.
NOTE:
Be sure to securely fasten the front door lock remote control cable and front door inside locking cable to the handle assembly before reassembly, as
shown.
Technical Service Bulletin # NV001-07
Date: 070109
Interior - Inner Door Handle Creaking When Opening Doors
NVH
NV001-07
Title:
INSIDE DOOR HANDLE CREAK
Models:
'07 FJ Cruiser
January 9, 2007
Introduction
Some customers may notice a creaking noise coming from the inner door handles when opening the front driver and passenger doors. The door handle
assembly has been improved to correct this condition.
Applicable Vehicles
^
2007 model year FJ Cruiser vehicles produced BEFORE the Production Change Effective VINs shown below.