FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1443022.png)
41. REMOVE ROOF SIDE INNER GARNISH RH
a. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and open the cover.
b. Remove the bolt and the clip.
c. Disengage the 7 clips and the claw and remove the roof side inner garnish.
d. Pass the rear seat outer belt through the slit in the roof side inner garnish.
42. REMOVE ROOF SIDE INNER GARNISH LH
HINT: Use the same procedure as for the RH side.
43. REMOVE ROOF HEADLINING HOLE PLUG